Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM365N — Trang 11/22

Code: F1-52

Description: Finisher micro switch trouble
Causes: Finisher control PWB trouble. Each micro switch trouble. Harness and connector connection trouble.
Remedy: Use SIM3-2 to check the operations of the front door/ upper door open detection and the oscillation guide close detection. Check connection from the control PWB to the sensor. Replace the control PWB. Replace the sensor.

Code: F2-22

Description: Discharge lamp trouble
Causes: Contact trouble between the discharge lamp PWB and the PCU PWB. Discharge lamp PWB trouble. PCU PWB trouble.
Remedy: Replace the discharge lamp PWB. Check the harness and connector. Replace the PCU PWB.

Code: F2-39

Description: Process thermistor trouble
Causes: Process thermistor trouble. Process thermistor harness connection trouble. PCU PWB trouble
Remedy: Replace the process thermistor. Check connection of the harness and the connector. Replace the PCU PWB.

Code: F2-40

Description: Toner density sensor trouble.?
Causes: Toner density sensor output abnormality (Sample level 35 or less, or 220 or above) Connection trouble of the connector and the harness. Developing unit trouble. PCU PWB trouble.
Remedy: Replace the toner density sensor. Check connection of the connector and the harness. Replace the developing unit. Replace the PCU PWB.

Code: F2-45

Description: Image density sensor troubles
Causes: Image density sensor trouble. Sensor harness and connector connection trouble. Image density sensor dirt. PCU PWB trouble.
Remedy: Replace the image density sensor . Check connection of the sensor harness and connector. Clean the image density sensor. Replace the PCU PWB.

Code: F2-50

Description: Drum phase sensor trouble
Causes: Drum phase sensor trouble. Drum phase sensor harness and connector connection trouble. Drum drive section trouble. PCU PWB trouble.
Remedy: Replace the drum phase sensor. Check connection of the drum phase sensor harness and the connector. Repair the drum drive section. Replace the PCU PWB.

Code: F2-58

Description: Process humidity sensor trouble
Causes: Process humidity sensor trouble. Harness and connector connection trouble. PCU PWB trouble.
Remedy: Replace the process humidity sensor. Check connection of the connectors and the harness. Replace the PCU PWB.

Code: F2-64

Description: Toner supply operation trouble
Causes: Toner clutch trouble. Toner density sensor trouble. Connector/harness trouble. PCU PWB trouble. Toner cartridge trouble. Developing unit trouble.
Remedy: Replace the toner clutch. Replace the toner density sensor. Connector and harness check. Replace the PCU PWB. Replace the toner cartridge. Replace the developing unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie