Description: Auto developer adjustment trouble (Under-toner) The toner concentration output is detected as 3.5V or above in the auto development adjustment.
Causes: Insufficient toner concentration Charging voltage, developing voltage abnormality Insufficient toner concentration Developing unit trouble PCU PWB trouble
Remedy: Use SIM25-2 to perform auto developer adjustment.
Description: Finisher communication trouble Communication cable test error after turning on the power or exiting from SIM. Communication error with the finisher
Causes: Improper connection or disconnection of connectors and harness between the machine and the finisher. Finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noises
Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the finisher control PWB or PCU PWB.
Description: Mail-bin stacker communication trouble Communication cable test error after turning on the power or exiting from SIM. Communication error with the Mail-bin stacker.
Causes: Improper connection or disconnection of connector and harness between the machine and the Mail-bin stacker. Mail-bin stacker control PWB trouble Control PWB (PCU) trouble Malfunction by noises
Remedy: Canceled by turning OFF/ON the power. Check harness and connector in the communication line. Replace the Mail-bin stacker PWB or PCU PWB.
Description: Finisher transport motor abnormality Transport motor drive trouble
Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Motor RPM abnormality Overcurrent to the motor Finisher control PWB trouble
Remedy: Use SIM 3-3 to check the transport motor operation.
Description: Mail-bin stacker transport motor abnormality Transport motor trouble
Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Motor rpm abnormality Overcurrent to the motor Mail-bin stacker control PWB trouble
Remedy: Use SIM3-21 to check the transport motor operation.
Description: Finisher staple shift motor trouble Staple motor drive trouble
Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Home position sensor abnormality Motor rpm abnormality Finisher control PWB trouble
Remedy: Use SIM3-3 to check operations of the staple motor.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.