Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM503F — Trang 10/18

Code: F2-70

Description: Improper toner cartridge detection
Causes: An improper toner cartridge is inserted. (The main unit detects a toner cartridge of a different specification.) Toner cartridge trouble. PCU PWB trouble
Remedy: Replace the toner cartridge. Replace the PCU PWB.

Code: F2-74

Description: Toner cartridge CRUM error
Causes: Toner cartridge (CRUM) trouble. PCU PWB trouble. Connector/harness trouble.
Remedy: Replace the toner cartridge. Replace the PCU PWB. Connector and harness check.

Code: F3-12

Description: Paper feed tray 1 lift operation trouble
Causes: LUD1 is not turned ON within the specified time. CLUD1 sensor trouble Paper feed tray 1 lift unit trouble. PCU PWB trouble. Harness and connector connection trouble.
Remedy: Check connection of the harness and the connector of LUD1. Replace the lift-up unit. Replace the PCU PWB.

Code: F3-22

Description: Paper feed tray 2 lift operation trouble
LUD2 does not turn ON within the specified time.
Causes: LUD2 does not turn ON within the specified time. CLUD2 sensor trouble. Paper feed tray 2 lift unit trouble. PCU PWB trouble. Harness and connector connection trouble.
Remedy: Check the harness and the connector of LUD2. Replace the lift-up unit. Replace the PCU PWB.

Code: F6-00

Description: MFP-FAX communication trouble
Communication establishment error/Framing/Parity/ Protocol error
Causes: FAX unit PWB connector connection error FAX unit PWB - MFPcnt PWB harness trouble FAX unit PWB mother board connector pin breakage FAX unit ROM trouble/ROM pin breakage
Remedy: Case 1 Cause FAX unit PWB connector connection error Check and remedy Check the connector connection between the FAX unit PWB and the MFPcnt PWB. Case 2 Cause FAX unit PWB - MFPcnt PWB harness trouble Check and remedy Check the connector harness between the FAX unit PWB and the MFPcnt PWB. Case 3 Cause FAX unit PWB mother board connector pin breakage Check and remedy Check the machine grounding. Case 4 Cause FAX unit ROM trouble/ROM pin breakage Check and remedy Check the FAX unit PWB ROM.

Code: F6-01

Description: FAX board EEPROM read/write error
EEPROM access error (read/write)
Causes: EEPROM trouble FAX PWB EEPROM access circuit trouble
Remedy: Case 1 Cause EEPROM trouble Check and remedy Check that no trouble occurs after replacement of EEPROM. Execute the memory check of SIM66-3 to insure that EEPROM can be accessed. Case 2 Cause FAX PWB EEPROM access circuit trouble Check and remedy Replace the PWB. In this case, not need to execute the simulation.

Code: F6-04

Description: FAX MODEM operation trouble
FAX PWB MODEM chip operation trouble
Causes: FAX PWB MODEM chip operation trouble
The FAX PWB MODEM chip cannot be accessed.
Remedy: Case 1 Cause FAX PWB MODEM chip operation trouble Check and remedy Replace the FAX PWB MODEM chip. Case 2 Cause The FAX PWB MODEM chip cannot be accessed. Check and remedy Replace the FAX PWB

Code: F6-21

Description: Combination error between the TEL/LIU PWB and the FAX soft switch
Combination error between the TEL/LIU PWB and the FAX PWB information (soft switch)
Causes: The destination of the installed TEL/LIU PWB differs. The FAX PWB information (soft switch) differs. TEL/LIU PWB trouble
Remedy: Case 1 Cause The destination of the installed TEL/LIU PWB differs. Check and remedy Check the destination of the installed TEL/LIU PWB. Case 2 Cause The FAX PWB information (soft switch) differs. Check and remedy Check the FAX PWB information (soft switch). Case 3 Cause TEL/LIU PWB trouble Check and remedy Replace the TEL/LIU PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie