Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM565N — Trang 13/22

Code: F6-04

Description: FAX MODEM operation trouble
FAX PWB MODEM chip operation trouble
Causes: FAX PWB MODEM chip operation trouble The FAX PWB MODEM chip cannot be accessed.
Remedy: Replace the FAX PWB MODEM chip. Replace the FAX PWB.

Code: F6-21

Description: Combination error between the TEL/LIU PWB and the FAX soft switch
Combination error between the TEL/LIU PWB and the FAX PWB information (soft switch)
Causes: The destination of the installed TEL/LIU PWB differs. The FAX PWB information (soft switch) differs. TEL/LIU PWB trouble
Remedy: Check the destination of the installed TEL/LIU PWB. Check the FAX PWB information (soft switch). Replace the TEL/LIU PWB.

Code: F6-30

Description: Access error to 1-chip microprocessor on the FAX board (FAX detection)
Access error (read/write) to 1-chip microprocessor on the FAX board
Causes: Program writing error (or no writing) to the 1-chip microprocessor. 1-chip microprocessor trouble. FAX PWB 1-chip microprocessor access circuit trouble.
Remedy: Use SIM66-24 to rewrite the 1-chip microprocessor program. Replace the 1-chip microprocessor chip. When replacing, use SIM66-42 to rewrite the 1-chip microprocessor program. Replace the FAX PWB.

Code: F6-97

Description: The FAX PWB does not match with the machine model.
The FAX PWB identification model does not match with the machine model
Causes: An improper type of FAX PWB is installed to the machine.
Remedy: Replace the FAX PWB with a proper one.

Code: F6-98

Description: Combination error between the FAXBOX destination information and the machine destination information.
Combination error between the FAX PWB destination information and the machine destination information.
Causes: Combination error between the destination information written in EEPROM on the FAX PWB and the destination information of the machine (set with SIM26-6).
Remedy: 1) Check the destination of the FAX PWB. 2) Check the destination of the machine. (SIM26-6) 3) Use a proper combination of the machine and the FAX PWB.

Code: F9-91

Description: Communication error between MFP and the Printer section when booting
Causes: MFP section PWB trouble. Printer section PWB trouble Printer flash ROM trouble. MFP PWB-printer section PWB connection trouble.
Remedy: Replace the MFP PWB. Replace the printer flash ROM. Check connection between the MFP PWB and the printer section PWB

Code: F9-92

Description: Printer (section) PWB hardware error
Causes: MFP PWB trouble.
Remedy: Replace the MFP PWB.

Code: H2-00

Description: Thermistor open trouble (TH_UM)
Causes: Thermistor trouble. PCU PWB trouble Connection trouble of the connector and the harness. Fusing unit not installed.
Remedy: Replace the thermistor. Replace the PCU PWB. Check connection of the connector and the harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie