• Code: F0-32
• Description: Finisher paper pass unit transport motor trouble
• Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
• Remedy: Use SIM3-3 to check the operation of the relay paper transport motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB and the motor.

• Code: F0-33
• Description: Finisher punch shift motor trouble
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the punch shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-34
• Description: Finisher punch motor trouble
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
• Remedy: Use SIM3-3 to check the operation of the punch motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-37
• Description: Finisher backup RAM trouble
• Causes: Finisher control PWB trouble, EEPROM chip breakdown
• Remedy: Replace the finisher control PWB.

• Code: F0-40
• Description: Communication trouble between the finisher saddle and the trimmer
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness.
• Remedy: Turn OFF/ON the power. Check the connector between the saddle and the trimmer unit. Replace the control PWB of the saddle unit. Replace the control PWB of the trimmer unit.

• Code: F0-41
• Description: Finisher saddle lead edge stopper motor trouble
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
• Remedy: Use SIM3-3 to check the operation of the saddle lead edge stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-42
• Description: Finisher saddle folding roller guide motor trouble
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
• Remedy: Use SIM3-3 to check the operation of the saddle folding roller guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-43
• Description: Finisher saddle alignment motor section abnormality
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle paper alignment motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.