Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM754N — Trang 21/31

Code: F7-21

Description: Combination error between TEL/LIU and FAX soft switch (2nd line)
Causes: Incompatibility between the TEL/LIU PWB and the FAX control PWB information (soft switch)
Remedy: Case 1 Cause The destination of the TEL/LIU PWB installed is improper. Check and Remedy Check the destination of the TEL/LIU PWB. Case 2 Cause TEL/LIU PWB trouble. Check and Remedy Replace the TEL/LIU PWB.

Code: F7-30

Description: FAX microprocessor access error(2nd line)
Causes: FAX 1-chip microprocessor access error (Read and write)
Remedy: Case 1 Cause Program writing trouble to the 1-chip microprocessor, or no program data written. Check and Remedy Use SIM66-42 to rewrite the 1-chip microprocessor program. Case 2 Cause FAX 1-chip microprocessor circuit trouble. Check and Remedy Replace the FAX control PWB.

Code: F7-97

Description: Incompatibility between FAX control and main machine(2nd line)
Causes: The FAX control PWB installed is improper. FAX control PWB trouble.
Remedy: Install a proper FAX control PWB. Replace the FAX control PWB.

Code: F7-98

Description: Incompatible destination between FAX control and main machine(2nd line)
Causes: Incompatibility between the destination information written into the FAX control PWB EEPROM and that in the main machine (set with SIM26-6)
Remedy: 1) Check the destination of the FAX control PWB. 2) Check the destination of the machine. (SIM26-6)

Code: F8-00

Description: Communication trouble between MFP and FAX 3rd line
Causes: MFP - FAX communication establishment error / Framing / Parity / Protocol error
Remedy: Case 1 Cause FAX control PWB trouble. Check and Remedy Replace the FAX control PWB. Case 2 Cause FAX control PWB - MFPC PWB connector and harness trouble Check and Remedy Check the connector and the harness between the FAX control PWB and the MFPC PWB. Case 3 Cause FAX control PWB - Mother board connector and harness trouble Check and Remedy Check the connector and the harness between the FAX control PWB and the mother board. Case 4 Cause FAX control PWB ROM trouble / ROM pin breakage Check and Remedy Check the ROM of the FAX control PWB.

Code: F8-01

Description: FAX EEPROM read/write error(3rd line)
Causes: FAX control PWB EEPROM access error (Read and write)
Remedy: Case 1 Cause FAX control PWB EEPROM trouble Check and Remedy Check that no trouble occurs after replacement of EEPROM. Execute the memory check of SIM66-3 to insure that EEPROM can be accessed. Case 2 Cause FAX control PWB EEPROM access circuit trouble Check and Remedy Replace the FAX control PWB.

Code: F8-04

Description: FAX modem operation trouble(3rd line)
Causes: FAX control PWB MODEM chip operation trouble
Remedy: Case 1 Cause FAX MODEM chip operation trouble. Check and remedy Replace the FAX control PWB. Case 2 Cause The FAX MODEM chip cannot be accessed. Check and Remedy Replace the FAX control PWB.

Code: F8-21

Description: Combination error between TEL/LIU and FAX soft switch (3rd line)
Causes: Incompatibility between the TEL/LIU PWB and the FAX control PWB information (soft switch)
Remedy: Case 1 Cause The destination of the TEL/LIU PWB installed is improper. Check and Remedy Check the destination of the TEL/LIU PWB. Case 2 Cause TEL/LIU PWB trouble. Check and Remedy Replace the TEL/LIU PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie