Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM754N — Trang 11/31

Code: F0-53

Description: Trimmer inlet port separation motor trouble
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
Remedy: Use SIM3-3 to check the operation of the trimmer inlet port separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-54

Description: Trimmer paper exit separation motor trouble
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
Remedy: Use SIM3-3 to check the operation of the trimmer paper exit separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-55

Description: Trimmer bundle press motor trouble
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
Remedy: Use SIM3-3 to check the operation of the trimmer bundle press motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-56

Description: Paper remaining trouble in the trimmer
Causes: Trimmer inlet port sensor breakdown The paper bundle is bent and cannot be transported.
Remedy: Use SIM3-3 to check the operation of the trimmer transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part. Check the paper bundle can be transported or not.

Code: F0-70

Description: Communication trouble between the finisher and the folding unit
Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness.
Remedy: Turn OFF/ON the power. Check connection between the finisher and the folding unit. Replace the control PWB of the folding unit.

Code: F0-71

Description: Folding unit lead edge holding guide motor trouble
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
Remedy: Use SIM3-3 to check the operation of the folding unit lead edge holding guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-72

Description: Folding unit backup RAM trouble
Causes: Folding unit control PWB trouble, EEPROM chip breakdown.
Remedy: Replace the folding unit control PWB.

Code: F0-73

Description: Folding unit power supply fan trouble
Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy: Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie