Remedy: Check connection of the connector and the harness of the LD PWB and the PCU PWB. Replace the PCU PWB. If the above remedies cannot delete the trouble, replace the LSU.
Description: Installation error of HDD which was used in the mirroring kit When a HDD which was used in the mirroring kit is installed to the MFP without the mirroring kit, its operation is restricted in order to prevent against malfunction.
Causes: A HDD which was used in the mirroring kit is installed to the MFP without the mirroring kit.
Remedy: Replace the HDD with one which has not been used in the mirroring kit.
Description: Automatic toner density adjustment error (Over toner) When in the automatic toner density adjustment, the sample level is less than 67 or the control voltage value exceeds 197.
Causes: Toner density sensor trouble. Developing unit trouble. PCU PWB trouble.
Remedy: Replace the toner density sensor. Replace the developing unit. Replace the PCU PWB.
Description: Automatic toner density adjustment error (Under toner) When in the automatic toner density adjustment, the sample level exceeds 154 or the control voltage value is less than 49.
Causes: Toner density sensor trouble. Developing unit trouble. PCU PWB trouble.
Remedy: Replace the toner density sensor. Replace the developing unit. Replace the PCU PWB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.