Code :

Code: F6-30
Description: Access error to the power controller on the FAX PWB. (FAX detection). Access error to the power controller (read /write)
Causes: Power controller trouble. FAX PWB power controller access circuit trouble. Power controller program write error. (Or, the power controller program is not written.)
Remedy: Use Sim. 66-42 to rewrite the power controller program. Replace the chip. When replaced, rewrite of the power controller program with Sim. 66-42 is required. Replace the FAX PWB.

Code: F6-97
Description: FAX PWB skating trouble. The FAX PWB model identification does not match the machine model.
Causes: The FAX PWB model does not match the machine model.
Remedy: Replace the FAX PWB with one whose model matches the machine model.

Code: F6-98
Description: Combination error between the FAX PWB destination information and the machine destination information
Causes: The destination information written in the EEPROM on the FAX PWB does not match the destination information of the machine (set with Sim. 26 - 6).
Remedy: Check the FAX PWB destination. Check themachine destination setting. (SIM26-6 ) Use the proper combination between the machine and the FAX PWB.

Code: F9-00
Description: Communication trouble between the controller and the printer controller (FIERY).
Causes: Printer controller ICU PWB cable trouble. Printer controller trouble. ICU PWB trouble.
Remedy: Check connection of the printer controller cable. Repair or replace the printer controller. After checking, turn OFF /ON the power of the machine and the printer controller.

Code: FF-00
Description: Double feed detection trouble (PCU)
Causes: Double feed sensor abnormality. Harness / circuit trouble related to the double feed sensor. Insertion failure of the drawer connector of the PS unit.
Remedy: Check the circuit related to the double feed sensor and the harness and the connector. Replace the double feed detection PWB and the sensor.

Code: FF-10
Description: Double feed detection trouble (SCU)
Causes: Double feed sensor abnormality. Harness/circuit trouble related to the double feed sensor.
Remedy: Check the circuit related to the double feed sensor and the harness and the connector. Replace the double feed detection PWB and the sensor.

Code: H2-00
Description: Non-contact main thermistor (detection) open (RTH1-d_D)
Causes: Thermistor trouble, control PWB trouble. Fusing section connector trouble. AC power source trouble. The fusing unit is not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-01
Description: Sub thermistor open (RTH2)
Causes: Thermistor trouble, control PWB trouble Fusing section connector trouble AC power source trouble The fusing unit is not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.