Danh mục sản phẩm

Code :

Code: C33
Description: Set up failure

Code: C35
Description: Developer at transfer/separator adjustment. This might mean a developer leak or shorted corona.

Code: C41
Description: Fuser thermistor or low temperature.

Code: C43
Description: Fuser problem after warm-up.

Code: C44
Description: Fuser problem after warm-up.

Code: C45
Description: Fuser sub-thermistor open. User problems. Reset required. Turn off power. Hold "0" & "8" keys while turning power on. Then press "8". Then press "9". Then press "print". You will read "3" in the display. Using the # keys, press "0" & "9" at the same time.

Code: E01
Description: Jam

Code: E02
Description: Fuser jam

< 1 2 3 4 5 6 >

0