Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 2008A — Trang 7/26

Code: CB81

Description: Flash ROM abnormality. Abnormality of checksum value on finisher control PC board is detected when the power is turned ON. MJ-1109/1110
Causes: Finisher control PC board (FIN)
Remedy: Main power switch Turn OFF the main power switch, then back ON. Finisher control PC board (FIN) Board check

Code: CB82

Description: Finisher main program error. MJ-1109/1110
Causes: Finisher control PC board (FIN)
Remedy: Finisher control PC board (FIN) • Update the firmware version of the finisher control PC board (FIN). • Board check

Code: CB83

Description: Saddle main program error MJ-1110
Causes: Saddle control PC board (SDL)
Remedy: Saddle control PC board (SDL) • Update the firmware version of the saddle control PC board (SDL). • Board check

Code: CB84

Description: Punch unit main program error. Hole Punch Unit - Main CPU program error. MJ-1109/1110 (When MJ-6105 is installed)
Causes: Hole punch control PC board (HP)
Remedy: Hole punch control PC board (HP) • Update the firmware version of the hole punch control PC board (HP). • Board check

Code: CB92

Description: Saddle Stitch Finisher RAM abnormality MJ-1110
Causes: Saddle control PC board (SDL)
Remedy: Reproducibility Turn the power OFF and then back ON. Saddle control PC board (SDL) • Check if the conductor pattern on the saddle control PC board (SDL) is open circuited or short circuited. • Board check

Code: CB93

Description: Saddle Stitch Finisher additional folding motor abnormality. An abnormal interruption of the encoder pulse of the additional folding motor occurs. The [CB93] error also occurs when the error [EF18] has occurred consecutively for 3 times. MJ-1110
Causes: Additional folding motor (M20) Saddle control PC board (SDL)
Remedy: Additional folding carrier • Is there any mechanical problem when the additional folding carrier is moved? Correct if so. Additional folding motor (M20) • Motor check • Connector check (CN10) • Harness check Saddle control PC board (SDL) • Connector check (CN10) • Board check

Code: CB94

Description: Saddle transport motor abnormality or the motor is not moving normally. Paper holding mechanism or transport path switching solenoid abnormality. The [CB94] error also occurs when the error [EAB0] or [EF13] has occurred consecutively for 3 times. MJ-1110
Causes: Saddle transport motor (M16) Saddle control PC board (SDL)
Remedy: Transport roller • Is there any mechanical problem when the transport rollers are rotated? Saddle transport motor (M16) • Motor check • Connector check (CN5) • Harness check Saddle control PC board (SDL) • Connector check (CN5) • Board check

Code: CB95

Description: Saddle Stitch Finisher stacker motor abnormality. The [CB95] error also occurs when the error [EF16] has occurred consecutively for 3 times. MJ-1110
Causes: Stacker motor Saddle control PC board
Remedy: Stacker carrier • Is there any mechanical problem when the stacker carrier is moved? Stacker motor (M14) • Motor check • Connector check (CN8) • Harness check Saddle control PC board (SDL) • Connector check (CN8) • Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie