Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 2040c — Trang 19/33

Code: E3C0

Description: LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor.
Causes: Registration sensor Lower transport clutch LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[7]/[F]) • Connector check (CN348) • Harness check Lower transport clutches • Clutch check (Perform the output check: 03-229, 231) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check

Code: E3D0

Description: LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor.
Causes: 1st drawer feed sensor Lower transport clutches (high/ low speed) LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out
Remedy: 1st drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[G]) • Connector check (CN337) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN338) • Harness check LGC board • Board check • Connector check (CN337, CN348) • Harness check

Code: E3E0

Description: LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor.
Causes: 2nd drawer feed sensor Lower transport clutches (high/ low speed) PFP transport clutches LGC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[F]) • Connector check (CN348) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN348) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN244, CN349) • Harness check LGC board • Board check • Connector check (CN348, CN349) • Harness check PFP board • Board check • Connector check (CN241, CN244) • Harness check

Code: E400

Description: Jam access cover open jam: The jam access cover has opened during printing.
Causes: Switching regulator LGC board Transfer cover switch
Remedy: Switching regulator • Is the voltage of 24V being supplied from the power supply unit? (Perform the input check: 03-[FAX] ON[2]/[B]) • Connector check (CN345, CN361) • Fuse check (F201, F202, F203) LGC board • Board check • Connector check (CN345, CN361) • Harness check Transfer cover switch • Switch check (Perform the input check: 03-[FAX] ON[3]/[D]) • Connector check (CN338) • Harness check

Code: E410

Description: Front cover open jam: The front cover has opened during printing.
Causes: Switching regulator LGC board
Remedy: Switching regulator • Is the voltage of 24V being supplied from the power supply unit? (Perform the input check: 03-[FAX] ON[2]/[B]) • Connector check (CN345, CN361) • Fuse check (F201, F202, F203) LGC board • Board check • Connector check (CN345, CN361) • Harness check

Code: E420

Description: PFP side cover open jam: The PFP side cover has opened during printing.
Causes: PFP side cover opening/ closing switch PFP board LGC board
Remedy: PFP side cover opening/ closing switch • Is the PFP side cover opening/closing switch working? (Perform the input check: 03-[FAX] OFF[2]/[F]) • Connector check (CN349, CN241, CN243 • Harness check PFP board • Board check • Connector check (CN241, CN243) • Harness check LGC board • Board check • Connector check (CN349) • Harness check

Code: E430

Description: ADU open jam: The ADU has opened during printing.
Causes: ADU opening/closing switch ADU board LGC board
Remedy: ADU opening/closing switch • Is the PFP side cover opening/closing switch working? (Perform the input check: 03-[FAX] ON[2]/[C]) • Connector check (CN338, CN440, CN443) • Harness check ADU board • Board check • Connector check (CN440, CN443) • Harness check LGC board • Board check • Connector check (CN338) • Harness check

Code: E440

Description: Side cover open jam: The side cover has opened during printing.
Causes: Side cover switch LGC board
Remedy: Side cover switch • Is the PFP side cover opening/closing switch working? (Perform the input check: 03-[FAX] ON[0]/[B]) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie