Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 280 — Trang 3/19

Code: C550, C780

Description: RADF I/F error: Communication error has occurred between the RADF and the scanner.
Remedy: (1) Check if the harness connecting the RADF board and SLG board is disconnected or open circuited. (2) Check if the conductor pattern on the RADF board is short circuited or open circuited. (3) Check if the conductor pattern on the SLG board is short circuited or open circuited. (4) Replace the RADF board. (5) Replace the SLG board.

Code: C570

Description: Communication error between Engine-CPU and IPC board
Remedy: (1) Check if the LGC board and IPC board are connected properly. (2) Check if the conductor pattern on the IPC board is short circuited or open circuited. (3) Check if the conductor pattern on the LGC board is short circuited or open circuited. (4) Replace the IPC board. (5) Replace the LGC board.

Code: C580

Description: Communication error between IPC board and finisher
Remedy: (1) Check if the specified finisher is attached. (2) Check if the harness connecting the IPC board and the finisher controller PC board is disconnected or open circuited. (3) Check if the conductor pattern on the IPC board is short circuited or open circuited. (4) Check if the conductor pattern on the finisher controller PC board is short circuited or open circuited. (5) Replace the IPC board. (6) Replace the finisher controller PC board.

Code: C730

Description: EEPROM initialization error: EEPROM is not initialized normally when performing the code 05-356.
Remedy: (1) Check the RADF board, mainly IC12, for short circuits and open circuits. (2) Replace the RADF board.

Code: C740

Description: Reverse sensor adjustment error
Remedy: (1) Check if there is any foreign matter between the reverse sensor and the reflecting mirror. Check if the reflecting mirror is dirty. (2) Check if the harness connecting the reverse sensor and the RADF board is open circuited. (3) Check the circuits and connectors on the RADF board, mainly IC3, IC4 and CN4, for short circuits and open circuits. (4) Replace the reverse sensor. (5) Replace the RADF board.

Code: C810

Description: Fan motor abnormality: The fan motor is not rotating normally.
Remedy: (1) Check if the load on the motor shaft is normal. (2) Remove foreign matters. (3) Check if the harness connecting the fan motor and RADF board is open circuited. (4) Check if the power is supplied to the pin 1 of the CN9 on the RADF board during the operation. (5) Check the circuits and connectors on the RADF board, mainly Q12 and Q16, for short circuits and open circuits. (6) Replace the fan motor. (7) Replace the RADF board.

Code: C820

Description: Read sensor adjustment error: The read sensor cannot be adjusted normally when performing the code 05-356.
Remedy: (1) Check if there is any foreign matter between the read sensor and the reflecting mirror. Check if the reflecting mirror is dirty. (2) Check if the harness connecting the read sensor and the RADF board is open circuited. (3) Check the circuits and connectors on the RADF board, mainly IC3, IC4 and CN6, for short circuits and open circuits. (4) Replace the read sensor. (5) Replace the RADF board.

Code: C830

Description: Original length sensor adjustment error: The original length sensor cannot be adjusted normally when performing the code 05-356.
Remedy: (1) Check if there is any foreign matter between the original length sensor and reflecting mirror. Check if the reflecting mirror is dirty. (2) Check if the harness connecting the original length sensor and the RADF board is open circuited. (3) Check the circuits and connectors on the RADF board, mainly IC3, IC4 and CN3, for short circuits and open circuits. (4) Replace the original length sensor. (5) Replace the RADF board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie