Remedy: 1 Are connectors CN1 and CN5 on the motor drive board connected properly? Go to step 2. Connect CN1 and CN5. 2 Is connector CN33 on the printer controller board connected properly? Replace the motor drive board and go to step 3. Connect CN33. 3 Did replacement of the motor drive board solve the problem? Problem solved. Replace the printer controller board and go to step 4. 4 Did replacement of the printer controller board solve the problem? Problem solved. Replace all the supplies and go to step 5. 5 Did replacement of the supplies solve the problem? Problem solved. Replace the drive motor.
Remedy: 1 Is connector CN4 on the printer controller board securely connected? Replace the paper exit motor and go to step 2. Plug the connector in securely. 2 Did replacement of the paper exit motor solve the problem? Problem solved. Replace the printer controller board.
Remedy: 1 Is connector CN40 on the printer controller board securely connected? Go to “Highcapacity feeder (HCF) service check”. Plug the connector in securely.
Remedy: 1 Is connector J5 on the RIP board connected properly? Go to step 2. Properly connect J5. 2 Is 24 V dc present between pins 1 and 3 of connector J5 on the RIP board? Replace the RIP fan. Go to step 3. 3 Is 24 V dc present between pin 80 of the RIP/printer controller and ground? Replace the RIP board. Replace the printer controller board.
Remedy: 1 Is +24 V present between pins 1 and 3 on connectors CN17 (upper left fan) and CN5 (upper right fan) on the printer controller board? Replace the failing fan. Replace the printer controller board.
Remedy: 1 Is +24 V present between pins 1 and 3 of connector CN6 on the printer controller board? Replace the power supply fan. Replace the printer controller board.
Remedy: 1 Replace the fuser. Did this fix the problem? Problem solved. Return the fuser, replace the power supply 2 and go to step 2. 2 Did replacing power supply 2 fix the problem? Problem solved. Return power supply 2 and replace the printer controller board.
Remedy: 1 Is connector CN44 on the printer controller board connected properly? Disconnect CN44 and turn the printer on. Go to step 2. Plug the connector in securely. 2 Is error 923 displayed? Power off and reconnect CN44. Go to step 3. Replace the printer controller board. 3 Power the printer off and short pins 1 and 4 of CN44 and power on. Is error 923 displayed? Replace the fuser. Replace the printer controller board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.