Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 281c — Trang 6/21

Code: CB30

Description: Tray 1/Tray 2 shift motor abnormality: Tray 1/Tray 2 shift motor is not rotating or delivery tray is not moving normally. [MJ-1023/1024]
Remedy: MJ-1023/1024 Are the tray 1 shift area sensors 1-3 and tray 2 shift area sensors 1-3 normal? → NO → Replace the tray 1/2 shift area sensor boards. YES Are the wirings between the finisher controller PC board and the tray 1/2 shift motors (M37/ M38) correct? → NO → Correct the wirings. YES Is there any problem with the tray lift mechanism? → NO → Fix the lift mechanism. YES 1) Replace the tray 1/2 shift motors. 2) Replace the finisher controller PC board.

Code: CB40

Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
Remedy: MJ-1023/1024 Is the rear aligning plate home position sensor (PI37) normal? → NO → Correct the wiring. YES Is there any mechanical problem with the path of aligning plate? → NO → Fix the mechanism. YES 1) Replace the rear aligning plate motor. 2) Replace the finisher controller PC board.

Code: CB50

Description: Staple motor abnormality: Staple motor is not rotating or stapler is not moving normally. [MJ-1022/ 1023/1024]
Remedy: MJ-1022/1023/1024 Is the wiring between the stapler and finisher controller PC board correct? → NO → Correct the wiring. YES 1) Replace the stapler. 2) Replace the finisher controller PC board

Code: CB60

Description: Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally. [MJ-1023/1024]
Remedy: MJ-1023/1024 Is the stapler shift home position sensor (PI40) working normally? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and the stapler shift motor (M35) correct? → NO → Correct the wiring. YES Is there any mechanical problem with the stapler stand motion path? → YES→ Fix the lift mechanism. NO 1) Replace the stapler shift motor. 2) Replace the finisher controller PC board.

Code: CB80

Description: Backup RAM data abnormality:
1) Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1023/1024]
2) Abnormality of checksum value on punch controller PC board is detected when the power is turned ON. [MJ-1023/1024 (when MJ-6004 is installed)]
Remedy: MJ-1023/1024 Is the problem solved by turning the power of the equipment OFF and ON? → YES→ End. NO 1) Replace the finisher controller PC board. 2) Replace the punch controller PC board.

Code: CB90

Description: Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally. [MJ-1024]
Remedy: MJ-1024 Are the paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15) and paper pushing plate motor clock sensor (PI1) working normally? → NO → Replace the sensor. YES Is the paper pushing plate drive mechanism normal? → NO → Fix the mechanism. YES 1) Replace the paper pushing plate motor (M8). 2) Replace the saddle stitcher controller PC board.

Code: CBA0

Description: Stitch motor (front) abnormality: Stitch motor (front) is not rotating or rotary cam is not moving normally. [MJ-1024]
Remedy: MJ-1024 Are the front and rear stitchers and their stands installed properly? → NO → Install them properly. YES Are the stitcher home position switches (SW7/SW5) and stitcher motors (M7/M6) on the front and rear stitchers working normally? → NO → Replace the front or rear stitcher. YES Replace the saddle stitcher controller PC board.

Code: CBB0

Description: Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating or rotary cam is not moving normally. [MJ-1024]
Remedy: MJ-1024 Are the front and rear stitchers and their stands installed properly? → NO → Install them properly. YES Are the stitcher home position switches (SW7/SW5) and stitcher motors (M7/M6) on the front and rear stitchers working normally? → NO → Replace the front or rear stitcher. YES Replace the saddle stitcher controller PC board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie