Causes: Regist paper sensor stuck jam/detection of out-of-spec oversized documents – Once the regist paper sensor becomes active, it does not become inactive when the fed document is transferred to the distance exceeding the maximum page size. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Detection of out-of-spec undersized documents – Once the regist paper sensor becomes active, it becomes inactive before the fed document is transferred by the distance equal to the minimum page size. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Scan sensor stuck jam – The scan sensor does not become inactive even when the fed document is transferred by 60mm after the regist paper sensor becomes inactive. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Detection of a too little space between documents – Before the document is transferred by 31mm after the regist paper sensor becomes inactive, the sensor becomes active. Detection of a too little space between the documents. (Simplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Activation of the reverse paper sensor for the documents not to be reversed – Switching to the first separator is not carried out normally causing activation of the reverse paper sensor. (Simplex and Duplex) • The reverse paper sensor becomes active in feeding of a simplex document. • The reverse paper sensor becomes active between reversal to the back and activation of the regist paper sensor.
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Activation of a sensor at an unintended timing – The scan sensor, regist paper sensor, hopping sensor or reverse paper sensor becomes active at an unintended timing. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Detection of chattering of a sensor – Chattering of a sensor is detected. Once a sensor becomes active, the sensor becomes inactive in 5mm feeding of the document. Then the inactive sensor becomes active in the next 5mm feeding. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Reverse paper sensor stuck jam/ detection of out-of-spec oversized documents – The reverse paper sensor does not become inactive when the document is transferred to the distance exceeding the maximum page size. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.