Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 306 — Trang 7/33

Code: CB84

Description: Hole Punch Unit - Main CPU program error
Causes: Hole punch control PC board
Remedy: Hole punch control PC board (HP) • Is the firmware version of the PNC board (HP) latest? • Connector check • Board check

Code: CB90

Description: Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally.
Causes:
Remedy: Paper folding blade motor (M12) abnormality Check if the electrical continuity of the coil is normal. If electricity is not conducted, replace the motor. Paper folding blade motor clock sensor (S24) abnormality Measure the voltage on TP66 on the finisher control PC board (FIN). Then check that the measured voltage is 1V or lower when not shielded and within the range of 3.3V±5% when shielded. If the voltage does not fall within the range mentioned, replace the sensor. Paper folding blade home position sensor (S19) abnormality Measure the voltage on TP64 on the finisher control PC board (FIN). Then check that the measured voltage is 1V or lower when not shielded and within the range of 3.3V±5% when shielded. If the voltage does not fall within the range mentioned, replace the sensor. Faulty cables and connectors Check if the electrical continuity between the connector terminals is normal. If electricity is not conducted, replace the connectors. (Finisher control PC board (FIN): CN11, CN15) Finisher control PC board (FIN) abnormality If the error still occurs after replacing the motor, sensors and connectors, exchange the finisher control PC board (FIN).

Code: CB91

Description: Saddle Stitch Finisher flash ROM abnormality [MJ-1106]
Causes: Saddle controller PC board
Remedy: Reboot • Is the error recovered when the power of the equipment is turned OFF and then back ON? Saddle controller PC board (SDL) • Check if the conductor pattern on the saddle controller PC board (SDL) is open circuited or short circuited.

Code: CB92

Description: Saddle Stitch Finisher RAM abnormality [MJ-1106]
Causes: Saddle controller PC board
Remedy: Reboot • Is the error recovered when the power of the equipment is turned OFF and then back ON?

Code: CB93

Description: Additional folding motor abnormality [MJ-1106]
Causes: Additional folding motor Saddle control PC board
Remedy: Finisher related service call The [CB93] error also occurs when the error [EF18] has occurred consecutively for 3 times. Additional folding carrierr • Is there any mechanical problem when the additional folding carrier is moved? • Connector check • Harness check Additional folding motor (M20) • Motor check • Connector check • Harness check Saddle control PC board (SDL) • Connector check (CN18) • Board check

Code: CB94

Description: Saddle transport motor abnormality [MJ-1106]
Causes: Saddle transport motor Saddle control PC board
Remedy: Finisher related service call The [CB94] error also occurs when the error [EAB0] or [EF13] has occurred consecutively for 3 times. Check item Measures Transport roller • Is there any mechanical problem when the transport rollers are rotated? Saddle transport motor (M16) • Motor check • Connector check • Harness check Saddle control PC board (SDL) • Connector check (CN18) • Board check

Code: CB95

Description: Stacker motor abnormality [MJ-1106]
Causes: Stacker motor Saddle control PC board
Remedy: Stacker carrier • Is there any mechanical problem when the stacker carrier is moved? Stacker motor (M14) • Motor check • Connector check • Harness check Saddle control PC board (SDL) • Connector check (CN4) • Board check

Code: CBA0

Description: Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106]
Causes: Front saddle stapler clinch unit Saddle control PC board
Remedy: Front saddle stapler clinch unit Harness check Saddle control PC board (SDL) • Connector check (CN6) • Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie