Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 306SE — Trang 30/33

Code: F109_2

Description: Key consistency error: Signature Check public key damage.
Causes:
Remedy: Setting Reboot the equipment. If it cannot be recovered, reinstall the software in the following procedure. (1) Install the OS data.

Code: F109_3

Description: Key consistency error: HDD encryption parameter damage.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [START] → 5. Key Backup Restore.

Code: F109_4

Description: Key consistency error: license data damage.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [START] → 5. Key Backup Restore.

Code: F109_5

Description: Key consistency error: Encryption key for ADI-HDD is damaged.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore.

Code: F109_6

Description: Key consistency error: Administrator password error for ADI-HDD authentication.
Causes:
Remedy: Encryption key status confirmation Check the message displayed by [3] + [C] + [POWER] → 5. Key Backup Restore.

Code: F110

Description: Communication error between System-CPU and Scanner-CPU
Causes: SYS board. SLG board.
Remedy: Check ROM version Check the version of the system ROM on the SYS board. Check the version of the scanner ROM version on the SLG board. Board check Check if the harness connecting the SYS board and SLG board is disconnected or open circuited.

Code: F111

Description: Scanner response abnormality
Causes: SYS board. SLG board.
Remedy: Check ROM version Check the version of the system ROM on the SYS board. Check the version of the scanner ROM version on the SLG board. Board check Check if the harness connecting the SYS board and SLG board is disconnected or open circuited.

Code: F120

Description: Database abnormality: Database is not operating normally.
Causes:
Remedy: Setting 1. Check that no jobs remain and rebuild the databases. ([5] + [C] + [POWER] -> 4. Initialize database -> 1. LDAP DB and 2. Log DB (Job,Msg). 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] -> 4. System Software(HD data)) Notes: • If you rebuild the databases with a job remaining, delete it after finishing. • When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie