Causes: Detection of out-of-spec undersized documents – The reverse paper sensor becomes inactive before the document is transferred by the distance equal to the minimum page size. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Non-arrival at the regist paper sensor at reversing to the front – After reversing to the front, the regist paper sensor does not become active in a lapse of a certain period of time. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Non-arrival at the regist paper sensor at reversing to the back – When the document is transferred following reversal to the back, the regist paper sensor does not become active. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Remaining document detection at power on – A sensor other than the document set sensor becomes active when the power is turned on or the cover is opened and closed during operation.
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.