Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 3555CSE — Trang 7/36

Code: C8E0

Description: RADF communication protocol abnormality: The system has to be stopped because the control
Causes: RADF board
Remedy: Power Turn the power OFF and then back ON to check if the equipment operates normally. RADF board • Connector check • Board check

Code: C900

Description: Connection error between SYS board andLGC board
Causes: LGC board SYS board
Remedy: LGC board • Connector check (CN350) • Board check SYS board • Connector check (CN128) • Board check

Code: C911

Description: Toner cartridge IC chip access board abnormality
Causes: Toner cartridge LGC board HRNS-LGC-TNRIC-212 CTIF board
Remedy: 1 Does non-genuine toner cartridge display appear when the front cover is opened and closed? Yes Use the genuine toner cartridge. No 2 2 Toner cartridge • Check the phenomenon by removing the toner cartridges (Y, M, C and K) and reinserting them. • Check that the CTRG board of each cartridge (Y, M, C and K) is installed properly. • Avoid touching the contact point. • Wipe the contact point with a soft cloth if it's stained. 3 Contact point on the equipment side Check that the spring of the contact point for each color (Y, M, C and K) is not deformed. 4 Is the spring of the contact point returned when it is pushed lightly? Yes No • Check that the CTIF board is installed properly. • Board check 7 Notes: The spring of the contact point may be released if you push the toner cartridge all the way in when an abnormality occurs. 5 LGC board • Connector check (CN375) • Board check 6 HRNS-LGC-TNRIC-212 • Connector check (CN375, CN440) • Harness check 7 CTIF board for each color (Y, M, C and K) • Check that the board is installed properly. • Board check

Code: C940

Description: Engine-CPU abnormality
Causes: LGC board
Remedy: Main power switch Turn OFF the main power switch, then back ON. Engine-CPU, FROM, and SDRAM Check if the conductor pattern between the Engine-CPU, FROM is short circuited or open circuited. Check if the conductor pattern between the Engine-CPU, SDRAM is short circuited or open circuited. LGC board Board check

Code: C962

Description: LGC board ID abnormality
Causes: LGC board SYS board
Remedy: Error code • Turn the power OFF and then back ON using the main power switch, and then check if the error code changes to another one. • If it changes to another one, follow the procedure for the changed error code LGC board • Connector check (CN350) • Board check SYS board • Connector check (CN128) • Board check

Code: C964

Description: LGC board boot process abnormality
Causes: LGC board
Remedy: LGC board Turn the power OFF and then back ON using the main power switch. If the same error occurs again, replace the LGC board.

Code: C970

Description: High-voltage transformer abnormality: Leakage of the main charger is detected.
Causes:
Remedy: Main charger Check if the main charger is installed securely. Spring of high-voltage supply contact point Check if the spring of high-voltage supply contact point is deformed. Needle electrode • Check if the needle electrode is broken or the main charger grid is deformed. • Check if any foreign matter is on the needle electrode or main charger grid.

Code: C9E0

Description: Connection error between scanner CPU and system CPU
Causes: CCD board SYS board
Remedy: SYS board Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie