Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 357 — Trang 31/33

Code: F121

Description: Database abnormality (user information management database)
Causes:
Remedy: Setting 1. Delete the log in the following procedure:[5] + [C] + [POWER] → 4. Initialize database → 1. LDAP database (to delete user database) (Note that all user, role, group and accounting data will be deleted.) 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] -> 4. System Software(HD data)) Notes: . If you rebuild the databases with a job remaining, delete it after finishing. . When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.

Code: F122

Description: Database abnormality (Message/Job log management database)
Causes:
Remedy: Setting 1. Delete the log in the following procedure: [5] + [C] + [POWER] → 4. Initialize database → 2. Log database (jobs and messages) (Note that all job and message logs will be deleted.) 2. If the error is not recovered, reinstall the system software. ([4] + [9] + [POWER] -> 4. System Software(HD data)) Notes: . If you rebuild the databases with a job remaining, delete it after finishing. . When "Rebuilding all databases" is performed, all data including log/user/role/group/department information and address book data are deleted. If you back up the data in advance, they will be recovered by restoring them after rebuilding the database.

Code: F124

Description: Database abnormality : Database is not operating normally. (Language management database)
Causes:
Remedy: Setting Delete the journal file : [5] + [C] + [START] -> 4. Initialize DB - > 3. Language DB If the recovery is still not completed, reinstall the master data and application program. "11.2.1 Master data/System ROM/Engine ROM/ Scanner ROM / RADF ROM"

Code: F130

Description: Invaid MAC address
Causes:
Remedy: Setting Compare the serial number of the equipment with a number displayed with 08-9601. If they are different, enter the correct serial number at 08-9601, 08-9083.

Code: F131

Description: Error due to damage to filtering setting file
Causes:
Remedy: Setting 1. Check the bad sector of the HDD (08-9072). If the result is "NG", replace the HDD. Notes: It may take more than 30 minutes to finish the checking. 2. Perform [3] + [C] + [POWER] -> [3], and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] -> [3] is perform ed.

Code: F140

Description: ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted.
Causes: Main memory SYS board
Remedy: SYS board • Connector check • Board check Main memory • Check the installation • Main memory check

Code: F200

Description: Data Overwrite option (GP-1070) disabled
Causes:
Remedy: Setting Perform firmware installation (all firmware: OS, HDD, SYS, PFC Firmware, Engine Main Firmware, and Scanner Firmware) with the USB media. * When the function of the Data Overwrite option (GP- 1070) is deleted from the equipment, the service call “F200” occurs. Perform 08-3840 to install the Data Overwrite Enabler (GP- 1070). * If F200 occurs while High (“3”) is set for the security level (08-8911), it cannot be released by installing the firmware using the USB media. Install the Data Overwrite Enabler (GP-1070) by 08-3840.

Code: F350

Description: SLG board abnormality
Causes: SLG board
Remedy: SLG board Board check Combination of the firmware version • Check the combination of the firmware version of the system ROM, engine ROM, and scanner ROM. • Reinstall the scanner ROM firmware.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie