Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 456S — Trang 21/33

Code: EA26

Description: Paper transport jam (stop command request): A command to stop equipment operation is received while paper is being transported in the Finisher. [MJ-1101/MJ-1106] Paper transport jam in the Finisher (stop command request): The equipment is required to stop during the transporting of paper in the Finisher. [MJ-1032/MJ-1033]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check

Code: EA27

Description: Paper transport jam (paper not inserted): The equipment detects a paper-not-inserted jam but the entrance sensor is turned ON before the equipment is stopped. [MJ-1101/MJ-1106]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check

Code: EA28

Description: Paper transport jam (paper holder plate operation delay): An attempt to start the arm assisting operation for dropping paper on the finishing tray is made, but the previous arm assisting operation has not yet been finished. [MJ-1101/MJ-1106]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check

Code: EA29

Description: Paper transport jam (stack transport delay): The buffer tray is extended to drop a stack of paper on the finishing tray but the previous stack has not yet exited. [MJ-1101/MJ-1106]
Causes: MJ-1101 Entrance sensor Transport sensor Finisher contoller PC board
MJ-1106 Entrance sensor (S1) Transport sensor (S2) Processing tray sensor (S12) Assist arm motor (M10) buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: MJ-1101 Entrance sensor • Sensor check(S1) • Connector check (CN7, CN22) • Harness check Transport sensor • Sensor check(S2) • Connector check (CN7, CN22) • Harness check
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Processing tray sensor (S12) • Sensor check • Connector check • Harness check Paper holding cam Is there any mechanical problem when the paper holding cam is rotated? Assist arm motor (M10) • Motor check • Connector check • Harness check Buffer tray guide Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism. buffer tray guide motor (M2) • Motor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN6, CN13, CN11, CN18, CN26) • Harness check

Code: EA2A

Description: Paper transport jam in the Finisher (between the entrance path and middle path sensor): The leading edge of the paper has passed the entrance path sensor, but does not reach the middle path sensor in the Finisher Unit transport path. [MJ-1032]
Causes:
Remedy:

Code: EA2B

Description: Paper transport jam in the Finisher (middle path sensor): The paper remains at the middle path sensor for a longer period than specified while being transported on the Finisher Unit transport path. [MJ-1032]
Causes:
Remedy:

Code: EA2C

Description: Paper transport jam in the Finisher (between the entrance path and sub-path sensor): The leading edge of the paper has passed the entrance sensor, but does not reach the sub-path sensor in the Finisher Unit transport path. [MJ-1032]
Causes:
Remedy:

Code: EA2D

Description: Paper transport jam in the Finisher (sub-path sensor): The paper remains at the sub-path sensor for a longer period than specified while being transported on the Finisher Unit transport path. [MJ-1032]
Causes:
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie