Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 457S — Trang 16/33

Code: E410

Description: Front cover open jam: The front cover has opened during printing.
Causes: Front cover opening/closing switch LGC board
Remedy: 1 Is the front cover open? Yes Close the cover. No 2 2 Is the front cover opening/ closing switch working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[D]) Yes 3 No • Check if the connector of the front cover opening/closing switch is disconnected. • Check if the connector CN310 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the front cover opening/closing switch. • Replace the LGC board. 3 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03-[FAX] ON/[2]/[A]) Yes 4 No • Check if the connector for 24 V power supply is disconnected. • Check if the connector CN301 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the LGC board. 4 LGC board • Replace the LGC board.

Code: E420

Description: PFP side cover open jam: The PFP side cover has opened during printing.
Causes: PFP side cover opening/closing switch PFP board LGC board
Remedy: 1 Is the PFP side cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the PFP side cover opening/closing switch working? (Perform the input check in the test mode: 03- [FAX]OFF/[2]/[A]) Yes 3 No • Check if the connector of the PFP side cover opening/closing switch is disconnected. • Check if either of the connectors CN241 or CN243 on the PFP board is disconnected. • Check if the connector CN318 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the PFP board and LGC board are short circuited or open circuited. • Replace the PFP side cover opening/ closing switch. • Replace the PFP board. • Replace the LGC board. 3 Replacing board • Replace the PFP board. • Replace the LGC board.

Code: E430

Description: ADU open jam: The ADU has opened during printing
Causes: ADU opening/closing switch LGC board
Remedy: 1 Is the ADU open? Yes Remove the paper if there is any, then close the ADU. No 2 2 Is the ADU opening/ closing switch working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[F]) Yes 3 No • Check if the connector of the ADU opening/ closing switch is disconnected. • Check if the connector CN311 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the LGC board are short circuited or open circuited. • Replace the ADU opening/closing switch. • Replace the LGC board. 3 Replacing board • Replace the LGC board.

Code: E440

Description: Feed cover open jam: The feed cover has opened during printing.
Causes: Feed cover opening/closing detection sensor LGC board
Remedy: 1 Is the feed cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the feed cover opening/ closing detection sensor working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[E]) Yes 3 No • Check if the connector of the feed cover opening/closing detection sensor is disconnected. • Check if the connector CN311 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the feed cover opening/closing detection sensor. • Replace the LGC board. 3 Replacing board • Replace the LGC board.

Code: E450

Description: LCF side cover open jam: The LCF side cover has opened during printing.
Causes: LCF side cover opening/closing switch LCF board LGC board
Remedy: 1 Is the LCF side cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the LCF side cover opening/closing switch working? (Perform the input check in the test mode: 03- [FAX]OFF/[4]/[B]) Yes 3 No • Check if the connector of the LCF side cover opening/closing switch is disconnected. • Check if either of the connectors CN1 or CN7 on the LCF board is disconnected. • Check if the connector CN318 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the LCF board and LGC board are short circuited or open circuited. • Replace the LCF side cover opening/ closing switch. • Replace the LCF board. • Replace the LGC board. 3 Replacing board • Replace the LCF board. • Replace the LGC board.

Code: E480

Description: Bridge unit open jam: The bridge unit has opened during printing.
Causes: The bridge unit opening/closing switch LGC board
Remedy: 1 Is the bridge unit open? Yes Remove the paper if there is any, then close the unit. No 2 2 Is the bridge unit opening/ closing switch working? (Perform the input check in the test mode: 03-[FAX]ON/[3]/[E]: e-STUDIO206L/256/306 / 03-[FAX]ON/[4]/[E]: e-STUDIO356/456/506) Yes 3 No • Check if the connector of the bridge unit opening/closing switch is disconnected. • Check if the connector CN302 / CN400 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the bridge unit opening/closing switch. • Replace the LGC board. 3 Replacing board • Replace the LGC board.

Code: E490

Description: Job separator cover open jam: The job separator cover has opened during printing.
Causes: JSP cover switch JSP board LGC board
Remedy: 1 Is the JSP cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the JSP cover switch working? (Perform the input check in the test mode: 03- [FAX]ON/[3]/[E]) Yes 3 No • Check if the connector of the JSP cover switch is disconnected. • Check if either of the connectors CN260 or CN261 on the JSP board is disconnected. • Check if the connector CN302 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the JSP board and LGC board are short circuited or open circuited. • Replace the JSP cover switch. • Replace the JSP board. • Replace the LGC board. 3 Replacing board • Replace the JSP board. • Replace the LGC board.

Code: E491

Description: Offset tray cover open jam: The offset tray cover has opened during printing.
Causes: OCT cover switch OCT board. LGC board
Remedy: 1 Is the OCT cover open? Yes Remove the paper if there is any, then close the cover No 2 2 Is the OCT cover switch working? (Perform the input check in the test mode: 03- [FAX]ON/[3]/[E]) Yes 3 No • Check if the connector of the OCT cover switch is disconnected? • Check if either of the connectors CN260 or CN261 on the OCT board is disconnected. • Check if the connector CN302 on the OCT board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the OCT board and LGC board are short circuited or open circuited. • Replace the OCT cover switch. • Replace the OCT board. • Replace the LGC board. 3 Replacing board • Replace the OCT board. • Replace the LGC board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie