Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 506SE — Trang 32/33

Code: F400

Description: SYS board cooling fan abnormality
Causes: SYS board SYS/HDD cooling fan
Remedy: SYS/HDD cooling fan Check if the fan is rotating properly. If not, check if any foreign object is adhered. SYS board Check the connector (CN112) and relay connector.

Code: F500

Description: HD partition damage
Causes:
Remedy: Setting . Diagnose the file system with [5] + [C] + [Start] → 1. Check F/S, and then recover the problem partition with [5] + [C] + [Start] → 2. Recovery F/S. . If it still is not recovered by performing the above, reinstall the software after formatting the HDD with [3] + [C] + [START] -> 3: Format HDD.

Code: F510

Description: Application start error
Causes:
Remedy: Setting 1. Reboot. 2. If it has still not recovered, reinstall the HDD software. 3. If it still persists after step 2, perform [3] + [C] + [Start] -> 3, and then reinstall the HDD software. Note: User data will be deleted when [3] + [C] + [Start] -> 3 is performed.

Code: F520

Description: Operating system start error
Causes:
Remedy: Setting 1. Reboot. 2. If it has still not recovered, reinstall the HDD software. 3. If it still persists after step 2, perform [3] + [C] + [Start] -> 3, and then reinstall the HDD software. Note: User data will be deleted when [3] + [C] + [Start] -> 3 is performed.

Code: F521

Description: Integrity check error
Causes:
Remedy: Setting Restart the equipment. If the error is not recovered after restarting the equipment, reinstall software following the procedure below. (1) Turn the power OFF. (2) Turn the power back ON while pressing the [4] and [9] buttons simultaneously. (3) The authentication screen is displayed. Enter the password. (Password entry is not required under the default setting.) (4) Key in [1] to select "1. SYSTEM FIRMWARE (OS data)" and [4] to select "4. SYSTEM SOFTWARE (OS data) ", and then press the [START] button. (5) When updating is completed properly, "Update successful completed Restart the MFP" is displayed on the touch panel.

Code: F550

Description: Encryption partition error
Causes:
Remedy: Setting . Recover the encryption key with [3] + [C] + [Start] → 5.

Code: F600

Description: Software update error
Causes:
Remedy: Setting 1. Perform [3] + [C] + [POWER] -> [1] -> [START] for "Clear Error Flag in Software Installation". 2. Reinstall the firmware in error displayed on the F600 error screen.

Code: F700

Description: Overwrite error
Causes:
Remedy: Setting • If a service call occurs again after the reboot, replace the HDD.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie