Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 623 — Trang 29/29

Code: F105

Description: Other HDD errors
Remedy: (1) Check if the connectors of the HDD are disconnected. (2) Check if the connector pins are disconnected or the wires of harnesses are broken. (3) Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If the check result is failed, replace the HDD. (4) Replace the SYS board.

Code: F106

Description: Point and Print partition damage
Remedy: (1) Turn the power OFF and start up the Setting Mode (08). (2) Key in “662” and press the [START] button. (Partition clearing is performed.) (3) Restart the equipment. (4) Access TopAccess. Click the [Administration] tab, and then click the Maintenance Menu to open. Then install the “Point and Print” driver.

Code: F107

Description: /BOX partition damage
Remedy: Initialize the Electronic Filing using the Setting Mode (08-666).

Code: F108

Description: /SHA partition damage
Remedy: Initialize the shared folder using the Setting Mode (08-667).

Code: F110

Description: Communication error between System-CPU and Scan-ner-CPU
Remedy: (1) Check if the connector CN102, CN103 on the SYS board is disconnected. (2) Check if the connector CN10 on the SLG board is disconnected. (3) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (4) Check if the harness connecting the SYS board and LGC board is disconnected or open circuited. (5) Check the version of the system ROM on the SYS board. (6) Check the version of the engine ROM version on the LGC board. (7) Check the version of the scanner ROM version on the SLG board. (8) Replace the SYS board. (9) Replace the SLG board. (10) Replace the LGC board.

Code: F111

Description: Scanner response abnormality
Remedy: (1) Check if the connector CN102, CN103 on the SYS board is disconnected. (2) Check if the connector CN10 on the SLG board is disconnected. (3) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (4) Check if the harness connecting the SYS board and LGC board is disconnected or open circuited. (5) Check the version of the system ROM on the SYS board. (6) Check the version of the engine ROM version on the LGC board. (7) Check the version of the scanner ROM version on the SLG board. (8) Replace the SYS board. (9) Replace the SLG board. (10) Replace the LGC board.

Code: F120

Description: Database abnormality: Databases do not run normally.
Remedy: (1) Rebuild the databases. (Perform 08-684.) (2) If the error is not recovered, initialize the HDD. (Enter “2” at 08-690.)

Code: F130

Description: Invalid MAC address
Remedy: Compare the serial number of the equipment with a number displayed in 08-995. If they are different, enter the correct serial number at 08-995.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie