Description: Jam not reaching the original reading start sensor: The original does not reach the reading start sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
Causes: Original reading start sensor RADF board Perform the 05-3210 Roller Registration roller, Read roller
Description: Jam not reaching the original exit sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
Causes: Original exit sensor RADF board Perform the 05-3210 Roller
Description: Stop jam at the original registration sensor: The trailing edge of the original does not pass the original registration sensor after its leading edge has reached this sensor.
Causes: Original registration sensor RADF board Perform the 05-3210 Roller
Description: Stop jam at the reading start sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.
Causes: Original reading start sensor RADF board Perform the 05-3210 Roller Registration roller, Read roller
Description: Transport/exit signal reception jam during ADF standby status
Causes:
Remedy: RADF • Check if there is any paper in the RADF. Remove it if there is. Equipment • Check if there is any paper in the equipment. Remove it if there is. • If a jam still occurs, turn the power OFF and then back ON to check if the equipment operates normally.