Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 6570C

Code: C021

Description: Developer unit motor-YMC locking error: The developer unit motor-YMC is not rotating normally.
Causes: Developer unit motor-YMC LGC board
Remedy: LGC board • Connector check (CN316) • Harness check • Board check Developer unit motor-YMC • Motor check (Perform the output check: 03-113) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check Developer unit • Check if waste toner is clogged on the waste toner transport path of the YMC-drum cleaner. • Check if the developer material is excessively supplied to each YMC-developer unit. Drive unit • Unit check • Gear check • Driving section check Drum cleaner unit Check if waste toner is clogged on the toner recovery auger section. Process unit Drive section Check if the gear tooth flank is damaged. Check if there is any dust between the gear and the shaft. Check if the contact section between the gear and the shaft is worn out.

Code: C022

Description: Developer unit mixer motor-YMC locking error: The developer unit mixer motor-YMC is not rotating normally
Causes: Developer unit mixer motor-YMC LGC board
Remedy: LGC board • Connector check (CN316) • Harness check • Board check Developer unit mixer motor-YMC • Motor check (Perform the output check: 03-115) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check Developer unit • Check if developer material is excessively supplied to each YMC-developer unit. • Check if the developer material is excessively supplied to each YMC-developer unit. Drive unit • Unit check • Gear check Process unit Drive section Check if the gear tooth flank is damaged. Check if there is any dust between the gear and the shaft. Check if the contact section between the gear and the shaft is worn out.

Code: C023

Description: Developer unit motor-K locking error: The developer unit motor-K is not rotating normally.
Causes: Developer unit motor-K LGC board
Remedy: LGC board • Connector check (CN313) • Harness check • Board check Developer unit motor-K • Motor check (Perform the output check: 03-112) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check Developer unit • Check if waste toner is clogged on the waste toner transport path of the K-drum cleaner. • Check if the developer material is excessively supplied to the K-developer unit. Drive unit • Unit check • Gear check Drum cleaner unit Check if waste toner is clogged on the toner recovery auger section. Process unit Drive section Check if the gear tooth flank is damaged. Check if there is any dust between the gear and the shaft. Check if the contact section between the gear and the shaft is worn out.

Code: C024

Description: Developer unit mixer motor-K locking error: The developer unit mixer motor-K is not rotating normally.
Causes: Developer unit mixer motor-K LGC board
Remedy: LGC board • Connector check (CN313) • Harness check • Board check Developer unit mixer motor-K • Motor check (Perform the output check: 03-114) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check Developer unit • Check if waste toner is clogged on the waste toner transport path of the K-drum cleaner. • Check if the developer material is excessively supplied to the K-developer unit. Drive unit • Unit check • Gear check Process unit Drive section Check if the gear tooth flank is damaged. Check if there is any dust between the gear and the shaft. Check if the contact section between the gear and the shaft is worn out.

Code: C130

Description: 1st drawer tray abnormality: The tray-up motor is not rotating or the 1st drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 1st drawer)
Causes: Tray-up motor Tray-up sensor PFC board
Remedy: Tray-up motor • Motor check (Perform the output check: 03-246/247) • Connector check • Harness check Tray-up sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[H], /[9]/[G]) • Connector check • Harness check PFC board • Connector check (CN508, CN513) • Board check

Code: C140

Description: 2nd drawer tray abnormality: The tray-up motor is not rotating or the 2nd drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 2nd drawer)
Causes: Tray-up motor Tray-up sensor PFC board
Remedy: Tray-up motor • Motor check (Perform the output check: 03-246/247) • Connector check • Harness check Tray-up sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[H], /[9]/[G]) • Connector check • Harness check PFC board • Connector check (CN508, CN513) • Board check

Code: C150

Description: 3rd drawer tray abnormality: The 3rd drawer tray-up motor is not rotating or the 3rd drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 3rd drawer)
Causes: Tray-up motor Tray-up sensor PFC board
Remedy: Tray-up motor • Motor check (Perform the output check: 03-248/249) • Connector check • Harness check Tray-up sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[F], /[9]/[E]) • Connector check • Harness check PFC board • Connector check (CN504, CN505, CN506) • Board check

Code: C160

Description: 4th drawer tray abnormality: The 4th drawer tray-up motor is not rotating or the 4th drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 4th drawer)
Causes: Tray-up motor Tray-up sensor PFC board
Remedy: Tray-up motor • Motor check (Perform the output check: 03-248/249) • Connector check • Harness check Tray-up sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[F], /[9]/[E]) • Connector check • Harness check PFC board • Connector check (CN504, CN505, CN506) • Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie