Danh mục sản phẩm

Code :

Code: 041-340
Display: 041-340 Restart Printer Contact Support If Message Returns
Description: NVM (read/write error detected.
Causes: • MCU Board.

Code: 061-370
Display: 061-370 Restart Printer Contact Support If Message Returns
Description: LPH failure detected.
Causes: • Cable FFC. • IP Board. (3010/3040) • IP Board. (3045) • Harness Assy MC LP. • MCU Board.

Code: 075-100
Display: 075-100 Paper Jam Jam at Feed Open Rear Cover and Remove Paper
Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
Causes: • Feed Solenoid. • Registration Sensor. • Main Drive Motor. • MCU Board.

Code: 075-921
Display: 075-921 Insert Output to Tray Press Ok to Continue Printing
Description: Insert Output to Tray The sheet on which to print an oddnumbered page has not been loaded in the Tray for manual duplex printing.
Causes: • IP Board. (3010/3040) • IP Board. (3045) • MCU Board.

Code: 077-100
Display: 077-100 Paper Jam Jam at Feed Open Rear Cover and Remove Pape
Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
Causes: • Registration Sensor. • MCU Board.

Code: 077-104
Display: 077-104 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
Description: Regi Jam The paper does not pass through the Regi Sensor on time.
Causes: • Registration Sensor. • Main Drive Motor. • MCU Board.

Code: 077-106
Display: 077-106 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
Causes: • Registration Sensor. • Main Drive Motor. • MCU Board.

Code: 077-108
Display: 077-108 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
Description: Exit Jam The paper does not pass through the Exit Sensor on time.
Causes: • Fuser. • MCU Board.

< 1 2 3 4 5 6 >

0