• Code: 01
• Description: Engaged or no fax tone
• Causes: This code appears after 6 failed attempts.
• Remedy: Restart the transmission at a later time.

• Code: 03
• Description: Stopped by operator
• Causes: Communication stopped by the operator by pressing the STOP key.
• Remedy:

• Code: 04
• Description: Programmed number invalid
• Causes: Invalid programmed single-key or quickdial number (Example: a delayed transmission has been programmed with a single key and this key has been deleted).
• Remedy: Check the validity of the programmed number and/or the single-key associated to the programmed number.

• Code: 05
• Description: Scanning fault
• Causes: An error has occurred at the location of the document to be transmitted (Example: the sheet is jammed).
• Remedy: Check the ADF module.

• Code: 06
• Description: Printer not available
• Causes: An error has occurred on the printer (Example: out of paper, paper jam or cover open). In the case of a reception, this incident code only appears if the RECEPTION WITHOUT PAPER parameter is set to WITHOUT PAPER.
• Remedy: Check the printer.

• Code: 07
• Description: Disconnect
• Causes: The communication has been cut (bad connection).
• Remedy: Check the called number.

• Code: 08
• Description: Quality
• Causes: The document that you have transmitted has not been received correctly.
• Remedy: Contact your correspondent to check whether it is necessary to retransmit the document: the interference may have occurred in an unimportant area of the document.

• Code: 0A
• Description: No document to recover
• Causes: You have attempted to recover a document from a correspondent, but the latter has not stored the document or the password that was entered is wrong.
• Remedy: Contact your correspondent to check whether the document to recover has been stored or to check the validity of the password.