Mã lỗi Xerox Phaser 3320 — Trang 3/6
Code:
Tất cả lỗi (44)
01-100
01-110
03-410
03-420
03-450
03-600
03-602
03-800
04-500
05-100
05-600
05-900
05-920
06-100
06-200
07-110
07-130
07-210
07-220
07-230
07-500
07-530
08-100
08-500
08-600
08-610
08-700
09-100
09-350
09-450
09-550
09-800, 09-820
10-100, 10-200
10-300
14-100
17-100
17-200
17-562, 17-563
17-700
17-710
17-800
17-810
17-900
20-100
Display: Paper Jam in Tray 1
Description: Paper has jammed in the Tray 1 paper feeding area. Paper is jammed in pick-up unit. Open Tray 1 and remove the jammed paper.
Causes: • Pick Up Clutch • Pick Up Roller. • Feed Drive Assembly • Feed Roller • Retard Roller • Base Plate Pad • Tray 1
Display: Tray 2 Empty
Description: No paper in Tray 2 Load paper in Tray 2.
Causes: • Paper Empty Sensor • Main Board (Phaser 3320) (WorkCentre 3315/3325)
Display: Tray 2 is open.
Description: Tray 2 is open. Close Tray 2 until it locks into place.
Causes: • LVPS
Display: Paper Jam in Tray 2
Description: Paper has jammed in the Tray 2 paper feeding path. The leading edge of media does not arrive at Registration Sensor from Tray 2 on time. Open Tray 2 and remove the jammed paper. Power the printer Off and then On.
Causes: • Optional Tray Registration Clutch • Optional Tray Feed Clutch • Optional Tray Drive Assembly
Display: Bypass Empty
Description: The Bypass Tray is empty. Load the Bypass Tray.
Causes: • Paper Empty Sensor • Main Board (Phaser 3320) (WorkCentre 3315/3325)
Display: Paper Jam in Bypass
Description: Occurs when the machine detects non-feeding from the Bypass Tray. Remove the jam from Bypass Tray. Cycle printer power.
Causes: • Pick Up Clutch • Feed Drive Assembly • Pick Up Roller.
Display: Jam inside machine
Description: Paper jam in the Registration area. Open the Front Cover and remove the Print Cartridge to remove the jam. Cycle printer power.
Causes: • Feed Sensor • Registration Sensor • Main Drive Assembly • Main Board. (Phaser 3320) (WorkCentre 3315/3325)
Display: Jam in exit area
Description: Paper jam in the Fuser area. Open the Rear Cover and remove the jam. Open the Fuser Exit door and remove jam.
Causes: