Description: XERO Life Warning The Printer Xerographic Assembly (Imaging Units, Developers and Transfer Belt Assembly) have reached end-of-life, refer to the manual. Note: The error cannot be cleared once the printer has reached EOL. Printing will not be inhibited; however, print quality is no longer guaranteed.
Causes: • MCU Board, PL7.2.2
Remedy: 1. Turn the printer off and then on. Does the error persist? Go to step 2. Complete. 2. Is the print count close to or greater than 30k prints? Go to step 3. Contact your designated field support for assistance. 3. Does print quality meet or exceed guaranteed print quality specifications? Complete. Replace any component(s) related to the print quality issues.
Code: 092-310, 092-910
Description: Check Unit (ADC) Sensor The CTD (ADC) Sensor has reached the Cleaning time or the CTD (ADC) Sensor needs to be cleaned. • 092-310: Check CTD Unit <CDT Sensor Contamination> • 092-910: Check CTD Unit <CDT Sensor Contamination>
Causes: MCU Board, PL7.2.2
Remedy: 1. Disconnect P/J14 on the MCU Board. Is the voltage across ground at P/J14-1 and P/J14- 9 on the MCU Board +5 VDC? Go to step 2. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Go to step 2. 2. Does the error persist? Contact your designated field support for assistance. Complete.
Remedy: 1. Clean the ADC sensor. Does the error persist when the power is turned on? Go to step 2. Complete. 2. Disconnect the harness at MCU Board P/J14 and at Xerographics Assembly P/J140, and check the harness for continuity. Is the harness continuous? Go to step 3. Repair the harness. 3. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Does the error persist? Contact your designated field support for assistance. Complete.
Code: 092-661
Description: ENV Sensor Error The Environment (Temperature/Humidity) sensor detected the temperature anomaly. 661: Code:xxxxxxxx Restart Printer <Environmental Sensor Error>
Causes: MCU Board, PL7.2.2
Remedy: 1. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Does the error persist? Contact your designated field support for assistance. Complete.
Code: 093-423 ... 093-426
Description: Toner Cartridge (X) Near Life The Toner Cartridge (X) is approaching the replacement time. When all the toner cartridges are simultaneously approaching the replacement time, a warning is indicated in the following order: 1)Black 2)Cyan 3)Magenta 4)Yellow • 093-423: Ready to Print 093-423 Printer Y Cartridge is Close to Life • 093-424: Ready to Print 093-424 Printer M Cartridge is Close to Life • 093-425: Ready to Print 093-425 Printer C Cartridge is Close to Life • 093-426: Ready to Print 093-426 Printer X Cartridge is Close to Life
Remedy: 1. Reseat the Toner Cartridge. Does the error persist? Go to step 2. Complete. 2. Check P/J13 on the MCU Board. Is the connector secure? Go to step 4. Reconnect P/J13, then go to step 3. 3. Does the error persist? Go to step 4. Complete. 4. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Does the error persist? Contact your designated field support for assistance. Complete.
Code: 093-919 ... 093-922
Description: (X) Toner Low Density • 093-919: Low Density 093-919 Printer Check Y Cartridge Now • 093-920: Low Density 093-920 Printer Check M Cartridge Now • 093-921: Low Density 093-921 Printer Check C Cartridge Now • 093-922: Low Density 093-922 Printer Check X Cartridge Now
Causes: • MCU Board, PL7.2.2
Remedy: 1. Clean the ADC sensor. Does the error persist? Go to step 2. Complete. 2. Check that MCU Board P/J14 is securely connected? Is the connection secure? Go to step 3. Reconnect P/J14, then go to step 3. 3. Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Contact your designated field support for assistance.
Code: 093-926
Description: CRUM ID Error, Toner Cartridge (X) Detached An unsupported cartridge is detected or the indicated Toner Cartridge is not installed in the printer. If no toner cartridge has been installed in the printer, a warning is indicated in the following order: 1)Yellow 2)Magenta 3)Cyan 4)Black • 093-926: CRUM ID 093-926 Reseat K Cartridge
Remedy: 1. Are the Toner Cartridges installed in the printer Xerox Toner Cartridges? Go to step 2. Complete. 2. Disconnect P/J13 on the MCU Board and unlace the harness. Inspect the harness for damage. Is the harness damaged? Repair the harness, then go to step 3. Go to step 3. 3. Disconnect P/J13 on the PWBA MCU. Is the voltage across ground to P/J13-3 on the MCU Board approximately +3.3 VDC? Repair the Harness Assembly DCKR. Go to step 5. 4. Replace the Toner Cartridge (C, M, Y, or K). Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.
Code: 093-930 ... 093-933
Description: Replace Toner Cartridge The indicated toner cartridge needs to be replaced.
Remedy: 1. Reseat the appropriate Toner Cartridge. Does the error persist? Go to step 2. Complete. 2. Does the error persist when the power is turned off and on? Go to step 3. Complete. 3. Check P/J13 on the MCU Board. Is the connection secure? Go to step 5. Reconnect P/J13, then go to step 4. 4. Does the error persist? Go to step 5. Complete. 5. Disconnect P/J13 on the MCU Board, and inspect the harness. Is the harness damaged? Repair the harness, then go to step 6. Go to step 7. 6. Does the error persist? Go to step 7. Complete. 7. Replace the Toner Cartridge (C, M, Y, or K). Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Go to step 4. Contact your designated field support for assistance.
Máy Photocopy
Máy in mã vạch - In tem nhãn
PC- Laptop - Điện thoại
Máy in – Mực in
Máy chiếu - Màn chiếu
Máy chấm công - Kiểm soát ra vào
Máy hủy tài liệu
Máy đếm tiền, kho , quỹ
Loa - Loa bluetooth, vi tính, Karaok
Máy lạnh, Cây nước nóng lạnh
