Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 7700 — Trang 6/6

Code: 82

Description: 04-340 04-342 ERROR 82 ENGINE LOGIC BOARD RAM/ROM FAILURE
Remedy: 1. Turn printer power Off, then On. 2. If the problem persists, replace the Engine Controller Board.

Code: 83

Description: 04-362 ERROR 83 ENGINE LOGIC BOARD NVRAM FAILURE
Remedy: Replace the Engine Control Board. If the problem persists, replace the Image Processor Board.

Code: 84

Description: 04-371 ERROR 84 CONTROLLER TO ENGINE LOGIC BOARD TIME FAILURE
Remedy: Replace the Engine Control Board. If the problem persists, replace the Image Processor Board.

Code: 85

Description: 04-344 ERROR 85 ENGINE LOGIC BOARD MICRO PITCH FAILURE
Remedy: 1. Turn printer power Off, then On. 2. If the problem persists, replace the Engine Control Board.

Code: 86

Description: 04-345 ERROR 86 HIGH-VOLTAGE POWER SUPPLY FAILURE
Remedy: Replace the T3 High-voltage Power Supply. If problem persists, replace the Engine Control Board.

Code: 87

Description: 07-281 07-282 07-283 07-284 07-291 07-292 07-397 TRAY LIFT FAILURE
Remedy: One at a time, pull out and reinsert each paper tray. Listen for tray lift. Is there an Auxiliary Feeder (Lower Tray Deck or a High-capacity Feeder) installed? Y↓N→ Refer to “Tray (1, 2, 3 or 4) Will Not Lift” section, page 3-95, in Troubleshooting. Do any of the Auxiliary Feeder (LTD or HCF) Trays lift correctly? Y↓N→ Refer to “Auxiliary Feeder not recognized” section, page 3-96, in Troubleshooting. Refer to “Tray (1, 2, 3 or 4) Will Not Lift” section, page 3-95, in Troubleshooting.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie