Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 3550 — Trang 2/8

Code: 03-420, 03-421, 03-422

Description: Tray 2 Paper Information Mismatch
Causes: 03-420 The machine has detected a tray 2 paper colour, type or size mismatch during a print job. 03-421 The machine has detected a tray 2 paper type mismatch during a print job. 03-422 The machine has detected a tray 2 paper size mismatch during a print job.
Remedy: 1. If the fault is present when printing, check that the print driver and machine tray information are correct. 2. Go to GP 4 System Administration Tools. Check that the relevant tray paper type, colour and size settings are correct.

Code: 03-450

Description: Bypass Tray Paper Information Mismatch
Causes: The machine has detected a bypass tray paper colour, type or size mismatch during a print job.
Remedy: 1. If the fault is present when printing, check that the print driver and machine tray information are correct. 2. Go to GP 4 System Administration Tools. Check that the relevant tray paper type, colour and size settings are correct.

Code: 03-510, 03-520, 03-558, 03-559

Description: Foreign Device Interface Fault
Causes: 03-510 The foreign device interface is not detected. 03-520 The foreign device interface is not active. 03-558 The foreign device interface is not active. 03-559 The foreign device interface is no longer active.
Remedy: 1. If there is credit in the foreign device, check the wiring between the foreign device and the foreign device interface PWB . 2. Check that the foreign device interface PWB is securely connected to CN13 the Main PWB. 3. If necessary: a. Install a new foreign device interface PWB . b. Perform OF7 Main PWB Check RAP.

Code: 03-600

Description: Memory Failure
Causes: The machine has detected a memory access failure.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Remove, then reinstall the memory DIMM . 3. If necessary: a. Install a new memory DIMM . b. Perform OF7 Main PWB Check RAP.

Code: 03-800

Description: Check HDD
Causes: The machine has detected a fault with the hard disk drive (HDD).
Remedy: 1. Switch off the machine, then switch on the machine. 2. Check the wiring between the hard disk drive and the Main PWB. 3. If necessary: a. Install a new hard disk drive . b. Perform OF7 Main PWB Check RAP.

Code: 03-900

Description: Main PWB to GUI Communications Fault
Causes: A user interface to main PWB communications error has been detected.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Check the wiring between CN6 on the Main PWB and CN2 on the UI PWB. 3. Check the wiring between CN10 on the Main PWB and CN11 on the UI PWB. 4. Check the wiring between CN11 on the Main PWB and CN1 on the UI PWB. 5. If necessary: a. Install a new UI PWB . b. Perform OF7 Main PWB Check RAP.

Code: 03-940

Description: Main PWB to Tray 2 Communications Fault
Causes: A main PWB to tray 2 PWB communications error has been detected.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Check the wiring between CN33 and CN34 on the Main PWB and CN7 on the Tray 2 PWB. 3. If necessary: a. Install new components: • Tray 2 connector . • Tray 2 PWB . b. Perform OF7 Main PWB Check RAP.

Code: 03-970

Description: Main PWB Watchdog Detects Software Lockup
Causes: The main PWB software has stopped responding.
Remedy: 1. Switch off the machine, then switch on the machine. 2. Reload the software, GP 6. 3. Perform OF7 Main PWB Check RAP.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie