• Code: 09-230, 09-240, 09-250, 09-500
• Description: Toner Cartridge Communications Error RAP 09-230 The toner module CRUM failed to write to the CRUM PWB. 09-240 The machine failed to communicate with the toner module CRUM. 09-250 The machine detected a toner module read error. 09-500 The toner module is not installed or is not detected by the CRUM PWB.
• Remedy: 1. Check that the toner module, PL 9.10 Item 2 is installed correctly. 2. Remove the toner module. Check the CRUM contact on the toner module. 3. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 4. Install new components as necessary: • Toner module, PL 9.10 Item 2. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1.

• Code: 09-300
• Description: Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages.
• Remedy: 1. No immediate action is necessary. Ensure that a replacement xerographic module, PL 9.10 Item 1 is in stock.

• Code: 09-310
• Description: Drum Locked RAP 09-310 The machine has detected that the xerographic module has a mechanical fault.
• Remedy: 1. Remove the toner module, PL 9.10 Item 2 then the xerographic module, PL 9.10 Item 1. 2. Enter dC330 code 04-100. Check that the main BLDC motor runs and drives the xerographic module coupling gears, PL 4.20 Item 5 and PL 4.20 Item 15. Install new components as necessary, PL 4.20. 3. Manually rotate the xerographic drum coupling on the xerographic module. Make sure that the xerographic drum rotates freely. 4. If necessary, install a new xerographic module, PL 9.10 Item 1.

• Code: 09-320, 09-330, 09-340, 09-600
• Description: Drum Cartridge Communications Error RAP 09-320 The xerographic module CRUM failed to write to the CRUM PWB. 09-330 The machine failed to communicate with the xerographic module CRUM. 09-340 The machine detected a xerographic module read error. 09-600 The xerographic module is not installed or is not detected by the CRUM PWB.
• Remedy: 1. Check that the xerographic module, PL 9.10 Item 1 is installed correctly. 2. Remove the xerographic module. Check the CRUM contact on the xerographic module. 3. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 4. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1.

• Code: 09-400
• Description: Replace Drum RAP 09-400 The xerographic module has reached the end of the design life of 55,000 print pages
• Remedy: 1. Install a new xerographic module, PL 9.10 Item 1. 2. Check the wiring between the xerographic module connector, PL 4.15 Item 17 and CN11 on the Main PWB. If necessary, install a new xerographic module connector, PL 4.15 Item 17. 3. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • Main PWB, PL 1.10 Item 1.

• Code: 09-700
• Description: Toner Supplying Error RAP 09-700 The toner module has stopped supplying toner to the xerographic module.
• Remedy: 1. Check that the tape seal has been removed from the xerographic module, PL 9.10 Item 1. 2. Remove the toner module, PL 9.10 Item 2. Check that the locking lever opens and closes the toner shutter. 3. Install new components as necessary: • Toner module, PL 9.10 Item 2. • Xerographic module, PL 9.10 Item 1.

• Code: 09-800
• Description: Invalid Toner Cartridge RAP 09-800 The machine has detected an incompatible toner module.
• Remedy: 1. Ensure that the toner module, PL 9.10 Item 2 is the correct Xerox toner module for the machine. 2. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 3. Install new components as necessary: • Toner module, PL 9.10 Item 2. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1.

• Code: 09-900
• Description: Invalid Drum Cartridge RAP 09-900 The machine has detected an incompatible xerographic module
• Remedy: 1. Ensure that the xerographic module, PL 9.10 Item 1 is the correct Xerox xerographic module for the machine. 2. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 3. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1.