Code :

Code: 09
Display: ERROR CONDITION HEAD OPEN
Description: Printer stops and ERROR LED flashes.
Causes: Printhead is not fully closed. Head-open sensor not detecting position flag, or flag is not in the proper position.

Code: 11
Display: WARNING HESD UNDERTEMP
Description: Printer stops and ERROR LED flashes.
Causes: Printhead element is not hot enough to print properly. Printhead data cable not properly connected.

Code: 13
Display: ERROR CONDITION OUT OF MEMORY
Description: Printer stops and PAUSE LED lights.
Causes: Not enough memory to perform the function indicated in the second line of the display. (Printer may not be configured for continuous label stock with the maximum label length set too long.) Functions: 1. Creating a bitmap size is larger than label length/ width specified. 2. Storing a bitmap: Not enough memory available to store bitmap created. 3. Building a format: Label is too complex. 4. Storing a format size too large to fit in available memory. 5. Storing a graphic image is too large to fit in available memory. 6. Storing a font: Not enough memory to store font.

Code: 14
Display:
Description: Poor print quality.
Causes: Darkness set too low. Incorrect media and ribbon. Printhead just replaced. Incorrect printhead adjustments. Printhead resistance not configured to proper value.

Code: 15
Display:
Description: Truncated print, no print, or FEED operates incorrectly while using non-continuous media.
Causes: Maximum label length parameter set less than actual label length. Printer in Rewind or Peel-Off Mode turned on without media or liner around rewind spindle.

< 1 2 3 4 >