Code: 59.F0
Display: 59.F0 ERROR
Description: The transfer unit is missing or a motor error has occurred.
Remedy: 1. Verify that the ITB is installed correctly. Remove the ITB and manually test the alienation mechanism. 2. The position of the alienation mechanism in the ITB is monitored by the primary transfer roller disengagement sensor (SR17), which is located in the rear of the black cartridge slot. Perform the manual sensor test while the ITB is removed, and observe the state of sensor “I”. The normal state is “0”. When you insert a piece of paper into the sensor, the state should change to “1.” 3. Open the right door and defeat the interlock. Perform the ITB Contact/ Alienation test in the Component Test menu. Observe the alienationdrive hub, which is above the cyan cartridge. 4. If the sensor (SR17) fails, order the rear pre-exposure assembly and replace the faulty sensor with the new sensor from the assembly. 5. If the alienation drive hub does not rotate, the problem could be the fuser motor or the fuser-drive assembly.