Description: The product is unable to read the cartridge data. The print cartridge is present but defective. • 10.00.00 Supply memory error (black print cartridge) • 10.00.01 Supply memory error (cyan print cartridge) • 10.00.02 Supply memory error (magenta print cartridge) • 10.00.03 Supply memory error (yellow print cartridge) • 10.10.00 Supply memory error (e-label for the black print cartridge) • 10.10.01 Supply memory error (e-label for the cyan print cartridge) • 10.10.02 Supply memory error (e-label for the magenta print cartridge) • 10.10.03 Supply memory error (e-label for the yellow print cartridge) • 10.10.05 Supply memory error (e-label for the black image drum) • 10.10.06 Supply memory error (e-label for the cyan image drum) • 10.10.07 Supply memory error (e-label for the magenta image drum) • 10.10.08 Supply memory error (e-label for the yellow image drum)
Remedy: 1. Open the front door and remove the print cartridge, and then reinsert it. 2. Close the front door. If the message reappears, turn the product off and then on. 3. If the error reappears, replace the print cartridge.
Description: The product's real time clock experienced an error.
Remedy: Whenever the product is turned off and then turned on again, set the time and date at the control panel. See the user guide for more information. If the error persists, you might need to replace the formatter.
Description: The leading edge of the paper stopped between registration and the input to the fuser. The paper did not reach the loop sensors (SR14, SR15)
Remedy: Follow the onscreen instructions to locate and remove the paper or obstruction.