Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 66.12.01 — HP Color LaserJet CP6015

Code: 66.12.01

Display: 66.12.01
Description: Finisher-to-engine communication error The communication between the print engine and the finisher has been interrupted or lost.
Remedy: Control panel diagnostics: none 1. Verify that the latest firmware updates are installed for the engine and finisher. 2. Make sure that the finisher is properly grounded. • Ensure that the finisher is latched and locked to the engine by tightening the thumbscrew inside the front door. • Ensure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 3. Make sure that the communication cable from the engine to the finisher is correctly installed. 4. Verify that connectors J701 and J726 on the stacker controller PCA are fully seated and not damaged. 5. Remove and inspect the electrical connections for damage and then reinstall the IPTU. Make sure that the connector is fully seated and that the IPTU is securely fastened. 6. If the error persists, replace the IPTU. 7. Only if the error persists and the previous steps fail to correct the problem, replace the stacker controller PCA.

← Xem tất cả mã lỗi HP Color LaserJet CP6015

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie