Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 1160 — HP DesignJet 10000s

Code: 1160

Description: Wiping Error
When the Wiping Motor has been running for a while, the sensor fails to detect that the Motor has made one turn.
Remedy: • If the Wiper does not turn once: – Check manually by turning the Wiper Gears to see if the Wiper turns. If it does not turn then replace the Wiping Station. – Check whether 24 V is supplied to the Main PCA with the circuit tester. If the Wiper Motor does not turn even though the 24 V is supplied, there is a possibility of a failure in the Wiper Motor. Replace the Wiping Station . Page 8-145. – Make sure the Wiper Sensor Cable is connected correctly and is not damaged. – If the error continues, replace the Main PCA • If the Wiper does turn once: – Check whether the Wiper Sensor can be switched ON and OFF by manually rotating the Wiper. Check whether the lever type switch is not loose. – Make sure the Wiper Sensor Cable is connected correctly and is not damaged. – Make sure that the Wiper Sensor is clean. – If the error continues, replace the Main PCA

← Xem tất cả mã lỗi HP DesignJet 10000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie