Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 123x — HP DesignJet 10000s

Code: 123x

Description: Sub-Tank Sensor Error (Full or Half)
The Full and Half Sensors on the Sub-Tanks are defective. x = 0: Printhead Number 1 (Black). x = 1: Printhead Number 2 (Light Magenta). x = 2: Printhead Number 3 (Light Cyan). x = 3: Printhead Number 4 (Yellow). x = 4: Printhead Number 5 (Magenta). x = 5: Printhead Number 6 (Cyan).
Remedy: • Enter the Sensors Menu (in Maintenance Mode) and select "Sub Tank Sensor". Then execute ALL the "Full x" and "Half x" options, and check if the Sub-Tank Sensors are functioning correctly. Manually move the Sub-Tank Sensor Plate and if the Sensor responds, it means that it is working correctly. • If any of the Sub-Tank Sensors fail to respond, then replace the corresponding Sub-Tank Sensor . Page 8-115. • Make sure that the Sub-Tank Sensor Relay Cables (Left/Right) and the Sub- Tank Sensor Cables are connected correctly and are not damaged. • Replace the Main PCA

← Xem tất cả mã lỗi HP DesignJet 10000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie