Code: 170X
Description: Servo Motor Error
The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from the Linear Encoder Sensor does not change. x = 0: Feed System. x = 1: Carriage System. x = 2: Servo Unit.
The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from the Linear Encoder Sensor does not change. x = 0: Feed System. x = 1: Carriage System. x = 2: Servo Unit.
Remedy: • Make sure that there is no paper jam blocking the Carriage path. • Make sure that the corresponding cables are connected correctly to Connectors CN14 and CN17 on the Main PCA. • Make sure that the Linear Encoder Sensor Cable is connected correctly to the Carriage PCA. • Make sure that the Encoder Strip is not damaged or scratched. • Make sure that the pinchwheels rotate correctly. • Make sure that the Carriage gears work correctly • Replace the Main PCA • If the error continues, replace the Paper-Axis or Scan-Axis Motors.