Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H06 — HP DesignJet 10000s

Code: H06

Description: Front Heater Time-out Error
The temperature of the Front Heater does not reach the preset temperature even after 15 minutes.
Remedy: • Make sure that the Voltage alternation switch located at the back of the Printer is set correctly to the AC voltage being used. • Make sure that the Fuse (F2) on the Heater Relay Assembly has not blown. If the fuse has blown, replace it. • Make sure that the Heater Board is connected correctly to the Relay Board via the Relay Cable. • Make sure that the Heater Relay Assembly is connected correctly to the Front Heater. • Replace the Heater Relay Assembly • Replace the Front Heater

← Xem tất cả mã lỗi HP DesignJet 10000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie