Code: 1160
Description: Wiping Error
When the Wiping Motor has been running for a while, the sensor fails to detect that the Motor has made one turn.
When the Wiping Motor has been running for a while, the sensor fails to detect that the Motor has made one turn.
Remedy: Check whether the Wiper Blade turns once and the Wiper Blade Position Sensor detects the turn when the Printer is initializing when it is powered On. • If the Wiper does not turn once: – Check manually by turning the Wiper Gears to see if the Wiper Blade turns. If it does not turn then replace the Wiping Station. – Check whether +24 V (LED 38) is supplied to the Main PCA by checking that LED 38 is lit on the Main PCA. If the Wiper Motor does not turn even though the +24 V is supplied, there is a possibility of a failure in the Wiper Motor. Replace the Wiping Station. – Make sure the Wiper Blade Position Sensor Cable is connected correctly and is not damaged. – If the error continues, replace the Main PCA. • If the Wiper does turn once: – Check whether the Wiper Blade Position Sensor can be switched ON and OFF by manually rotating the Wiper Blade. Check whether the lever type switch is not loose. – Make sure the Wiper Blade Position Sensor is connected correctly and is not damaged. – Make sure that the Wiper Blade Position Sensor is clean. – Replace the ISS PCA. – If the error continues, replace the Main PCA.