• Code: 1010
• Description: ATG/RSM Loading Error
  The program load from the Flash ROM on the Main PCA to the ASIC on the Main PCA or sum-check was not performed correctly and an error occurred.
• Remedy: • Reinstall the Firmware. • Replace the Main PCA.

• Code: 1011
• Description: PTC/PDD Loading Error
  The program load from the Flash ROM on the Main PCA to the ASIC on the Carriage PCA or sum-check was not performed correctly and an error occurred.
• Remedy: • Reinstall the Firmware. • Make sure that the Carriage Cable is NOT damaged and is correctly connected to the Carriage PCA and the Main PCA. • Replace the Carriage PCA. • Replace the Main PCA. • If the error continues, replace the Trailing Cable

• Code: 1100
• Description: Flash ROM Error
  The program area in the Flash ROM is sum-checked, and it could not be read, causing an error.
• Remedy: • Reinstall the Firmware. • Replace the Main PCA.

• Code: 1101
• Description: ATG/RSM Error
  The read/write of the ATG/RSM registers and RSM Mask Memory Data on the Main PCA was diagnosed and an error was detected.
• Remedy: • Replace the Main PCA.

• Code: 1102
• Description: Trailing Cable Error
  The Trailing Cable between the Main PCA and the Carriage PCA is not connected.
• Remedy: • Reconnect the Trailing Cable to the Carriage PCA and the Main PCA. • Make sure that the Trailing Cable is not damaged. • Replace the Carriage PCA. • If the error continues, replace the Main PCA. • If the error continues after replacing the Main PCA and the Carriage PCA, replace the Trailing Cable.

• Code: 1103
• Description: Heater Relay Board Connection Error
  The Cable between the Main PCA and the Heater Relay Board is not connected.
• Remedy: • Reconnect the Cable to the Heater Relay Board and the Main PCA. • Make sure that the Cable is not damaged. • Replace the Heater Relay Board. • If the error continues, replace the Main PCA.

• Code: 1104
• Description: ISS PCA Connection Error
  The Cable between the Main PCA and the ISS PCA is not connected.
• Remedy: • Reconnect the Cable to the ISS PCA and the Main PCA. • Make sure that the Cable is not damaged. • Replace the ISS PCA. • If the error continues, replace the Main PCA.

• Code: 1105
• Description: PTC/PDD Error
  The PTC/PDD registers cannot be read or written correctly.
• Remedy: • Make sure that the Carriage Cable is NOT damaged and is correctly connected to the Carriage PCA and the Main PCA. • Replace the Carriage PCA. • Replace the Main PCA. • If the error continues, replace the Trailing Cable.