Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 120x — HP DesignJet 8000s

Code: 120x

Description: Printhead Drive IC Error
The Piezo Drive IC on a Printhead is either too hot (85C or higher) or too low (-10C or lower).
Remedy: • Check whether the temperature of the Printhead voltage circuit on the Carriage PCA is extremely hot. If it is extremely high, check the short-circuit of the Printhead and the Printhead Cable using a tester. The Short-circuit may have been caused by the incorrect insertion of the Printhead Cable, internal failure of the Printhead or by a foreign object attached to the Carriage PCA. • Replace the Carriage PCA.

← Xem tất cả mã lỗi HP DesignJet 8000s

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie