Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 87:10 — HP DesignJet T120

Code: 87:10

Description: Encoder Strip failure
Remedy: Remote troubleshooting (call agent) 1. Switch off the printer, and disconnect the power cord. Reconnect the power cord and power on the printer. 2. The call agent should arrange a service engineer visit to change the Encoder Strip and follow onsite troubleshooting below. • Encoder Strip (24) • CQ890-67003 • Encoder Strip (36) • CQ890-67004 3. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.
Onsite troubleshooting and solution (service engineer) 1. Remove the covers and check that Encoder Strip is not broken or dirty. • Cables Sk • CQ890-67021 2. If the Encoder Strip is dirty, follow the procedure in this manual to clean it, see Clean the Encoder Strip. 3. If the Encoder Disk is damaged or does not work, it should be replaced, see Encoder Disk. • Encoder Disk • CQ890-67033

← Xem tất cả mã lỗi HP DesignJet T120

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie