Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0009-0301 — HP DesignJet T730 Printer

Code: 0009-0301

Description: Scanbar failure
Causes:
Remedy: Remote troubleshooting (call agent)1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer. If the error persist, the call agent should arrange a service engineer visit.2. Print the scanner diagnostic plot or calibrate it.3. Scan it and check the result.Onsite troubleshooting and solution (service engineer)1. Check the Scanbar connections to the main PCA.2. Replace the Scanbars set, see Scanbars F9A30-67017 (HP DesignJet T830 MFP only). NOTE:Please remember all 3 scanbars, together with the 3 white calibration surfaces, need to be replaced.3. Print the scanner calibration plot and calibrate them.

← Xem tất cả mã lỗi HP DesignJet T730 Printer

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie