Code: 13.XX.XX
Display: 13.XX.YY JAM IN TRAY 2
Description: A page is jammed in tray 2.
Remedy: 1. Verify that the type and quality of the media that you are using meet HP specifications. 2. Verify that the media is loaded correctly and that the guides are not too tight or too loose against the stack of media. 3. Remove tray 2, clear the jam, and then reinstall tray 2. 4. Verify that the tray 2 pickup roller and separation pad are installed correctly. 5. Verify that solenoid SL2 is firmly seated on ECU connector J504. Verify that SL2 is being energized by removing the cover and observing the solenoid during a feed operation. 6. Open and close the cartridge door to clear the error message.