Description: IOT Exit Roller grabs the paper. Or Finisher Feeding Motors Stopped. Or Finisher Entrance Sensor damaged or harness damaged. Or Finisher Main Board damaged.
Remedy: 1) Check Jam Occurrence in IOT. If the IOT roller is grabbing the paper, it’s IOT fault 2) Check the Main Board Harness Connection. 3) Check Finisher Entrance operation & harness connection. 4) Check Finisher Feeding Entrance Motor Harness Connection and operation. 5) Check Finisher Feeding Exit Motor Harness Connection and operation. 6) If the same problem happens after checking 1-5, Replace the Finisher main board. 7) If the same problem happens after checking 6, replace the Finisher harnesses.