Description: Safety Switch Harness connection is loose. Main Board is damaged.
Remedy: 1) Check the Main Board harness connection. 2) Check the Safety Switch harness connection. 3) Check the Safety Unit’s operation. Check the switch is clicked when the Safety Link moves. 4) Check the Safety Unit’s operation using Rear Jogger. The same “switch ON/OFF” operation should be followed. 5) Check the Safety Unit’s operation. When Rear Jogger stands at the position having the Shield and Rear Jogger met, the Safety Switch should be ON. 6) If the same problem happens after checking 1-5, Replace the Finisher main board. 7) If the same problem happens after checking 6, Replace the Finisher harnesses.